Non-Electric Bidet Guide: How a Non-Electric Bidet Works and What to Check Before You Choose

A non-electric bidet adds a water wash to your toilet without needing a power point. If you are comparing a non-electric bidet for your bathroom, it helps to know how a non-electric bidet works, how it compares with an electric bidet, and what to check on your toilet before you order. This Conor guide covers each step for Australian homes.

You can follow along in the Conor non-electric bidet seat collection, where each non-electric bidet seat has its own product page with details, photos and a sizing chart.

What Is a Non-Electric Bidet?

A non-electric bidet is a bidet that runs on household water pressure and does not use power. It uses water at the temperature supplied by the household water connection and does not heat it.

There are two main types of non-electric bidet:

•       Non-electric bidet seat: A bidet seat that replaces your existing toilet seat, with a nozzle under the seat and a side lever to control the water.

•       Handheld bidet spray: A handheld sprayer on a hose, on a holder on the wall beside the toilet, so you keep your current toilet seat.

Both types connect to the household water supply and need no power point near the toilet.

Other Names for a Non-Electric Bidet

You may see a non-electric bidet described in several ways:

•       Non-electric bidet seat: A bidet seat that works without power.

•       Non-electric bidet toilet seat: Another name for a non-electric bidet seat.

•       Manual bidet seat: A bidet seat you control with a lever rather than electronic controls.

•       Mechanical bidet: A bidet that runs on water pressure, with no electronic parts for the wash.

•       Bidet attachment: A separate non-electric bidet fitting that may attach to an existing toilet seat or toilet. It is different from a complete replacement bidet seat.

These terms are sometimes used for similar non-electric bidet products, although a bidet attachment may be a separate fitting rather than a complete replacement toilet seat.

Why Compare a Non-Electric Bidet?

People compare a non-electric bidet for different reasons. Some have no power point near the toilet and would rather not add one. Others prefer a single lever control over a remote or control panel. Some want a water wash in a guest bathroom, ensuite or holiday home. A non-electric bidet is one option to compare in each of these situations, alongside electric bidet seats and a handheld bidet spray.

How a Non-Electric Bidet Works

A non-electric bidet seat works with your household water pressure:

1.    Water connection: The non-electric bidet seat connects to the water supply at the toilet through a water inlet on the left or right side, depending on the model.

2.    Side lever: When you turn the side lever, it opens the water flow to the nozzle and sets the water pressure.

3.    Nozzle: The nozzle sits under the seat and extends when the water flows, then returns when you turn the lever off.

4.    Wash: Depending on the model, you can choose a rear wash or a front wash from the lever.

5.    Water temperature: A non-electric bidet uses water at the temperature supplied by the household water connection and does not heat it.

Because a non-electric bidet seat has no heating element or electronic controls, it needs no power point near the toilet.

Using a Non-Electric Bidet Seat

Each non-electric bidet seat has its own instructions, so follow the user manual for your model. In general, using a non-electric bidet seat follows these steps:

6.    Sit on the seat.

7.    Turn the side lever to choose the wash and start the water flow.

8.    Turn the lever further or back to adjust the water pressure, according to your model.

9.    Turn the lever off to stop the water.

10.  Dry with toilet paper or a towel.

Using a Handheld Bidet Spray

A handheld bidet spray is another type of non-electric bidet. Hold and aim the sprayer, and press the lever to wash. Return the bidet spray to its holder after use.

Non-Electric Bidet vs Electric Bidet

Bidet seats generally fall into two broad categories: non-electric bidet seats and electric smart bidet seats. Handheld bidet sprays are another non-electric bidet option but are not toilet seats.

Non-Electric Bidet

•       Runs on household water pressure.

•       Needs no power point near the toilet.

•       Uses water at the temperature supplied by the household water connection and does not heat it.

•       Uses a side lever to control the water.

Electric Bidet

•       Uses power for water heating, seat heating, drying and electronic controls.

•       Features vary by model and can include a warm water wash, a heated seat and a warm air dryer.

•       A smart toilet seat or smart toilet needs a power point near the toilet. If there isn’t one, a licensed electrician can install it.

Compare each electric model in the Conor smart bidet seat collection.

Which One Should You Compare?

If there is no power point near the toilet and you would rather not add one, a non-electric bidet is the type to compare. If you would like warm water, a heated seat or drying, compare an electric bidet seat. If you are renovating or replacing the complete toilet suite, a smart toilet is one option to compare.

The Conor Elara Non-Electric Bidet Seat

The Conor Elara is a non-electric bidet seat that runs on household water pressure. It has front and rear wash, a side lever to set the water pressure, and a soft-closing seat and cover. It uses water at the temperature supplied by the household water connection and does not heat it.

The Elara comes in two shapes:

•       [Conor Elara D-Shape](https://conors.com.au/products/bidet-seat-d-shape-left-inlet): A non-electric bidet seat for D-Shape toilets.

•       [Conor Elara O-Shape](https://conors.com.au/products/bidet-seat-o-shape-left-inlet): A non-electric bidet seat for O-Shape toilets.

Each shape comes in left and right water inlet versions. Check the current product page for the complete feature list, sizing chart and specifications.

Conor offers D-Shape smart and non-electric seats, while Elara is also available in O-Shape.

The Conor Ember Handheld Bidet Spray

If you would like to keep your current toilet seat, the Conor Ember handheld bidet spray is another non-electric option. It sits on a holder on the wall beside the toilet. Hold and aim the sprayer, and press the lever to wash. The Ember needs no electricity and does not heat the water, and it comes in silver, black and gold.

Compare it in the Conor bidet spray collection.

Before You Choose a Non-Electric Bidet Seat

A non-electric bidet seat replaces your toilet seat, so check your toilet before you order.

Toilet Shape and Fit

A non-electric bidet seat is designed to replace an existing toilet seat, subject to the toilet being compatible with the model’s shape, dimensions and mounting requirements.

Check the toilet shape, pan length and width, mounting-hole spacing, rear and side clearance, and water inlet position against the exact model’s fit guide. Ask Conor to confirm compatibility if unsure.

Size and Clearance

Also compare the exact model’s overall length and width, mounting adjustment range and rear/side clearance with your toilet pan and cistern.

D-Shape or O-Shape?

Look at your toilet from above and compare your toilet pan’s outer shape, dimensions and fixing-hole positions with the sizing chart on the product page. Toilet shape is only one fit factor, so check the other measurements as well.

Water Inlet Side

Facing the toilet, check whether the water connection is on the left or the right. The Elara comes in left and right water inlet versions, so choose the version that matches your toilet.

Ask Conor if You Are Unsure

If you are unsure which non-electric bidet seat fits, send the Conor team top and side photos of your toilet together with the relevant measurements before ordering.

Non-Electric Bidet Installation

A non-electric bidet connects to your household water supply.

Any fitted bidet seat or handheld bidet spray connected to the household water supply must be installed by a licensed plumber in accordance with applicable Australian plumbing requirements. The licensed plumber must determine and provide the backflow protection required for the installation in accordance with applicable Australian plumbing requirements and the National Construction Code.

A non-electric bidet needs no power point, so no electrical work is needed for the bidet itself. Before installation, check the installation kit and parts listed on the product page, and keep the user manual for reference.

Non-Electric Bidet Water Pressure and Temperature

A non-electric bidet relies on your household water supply, so two things depend on your home rather than the bidet itself.

Water Pressure

The water pressure at the nozzle comes from your household water supply. Household water pressure varies from home to home. You set the flow with the side lever, according to your model. Your plumber can check the water connection when installing the non-electric bidet.

Water Temperature

A non-electric bidet uses water at the temperature supplied by the household water connection and does not heat it. If you would like a heated wash, compare an electric bidet seat, which heats the water as you use it. Heating methods vary by model.

Non-Electric Bidet for Different Bathroom Layouts

Every bathroom is set out differently, so plan for your layout before you order:

•       Separate toilet room: Check the space around the toilet and the side of the water connection, so the side lever and inlet suit the room.

•       Toilet beside a vanity: Check the clearance to the vanity, so the side lever is within reach and the seat can open fully.

•       Toilet in a corner: Check which side the water connection is on and whether the side lever will sit against a wall.

•       Ensuite bathroom: Ensuites can have less room around the toilet, so compare the rear and side clearance carefully.

Your plumber can confirm the connection for your layout.

Non-Electric Bidet Australia: What to Know

If you are comparing a non-electric bidet in Australia, keep these local points in mind:

•       Plumbing requirements: Any fitted bidet seat or handheld bidet spray connected to the household water supply must be installed by a licensed plumber in accordance with applicable Australian plumbing requirements, including the backflow protection required for the installation.

•       No power point needed: A non-electric bidet needs no electrical work for the bidet itself.

•       Toilet shapes: Conor offers D-Shape smart and non-electric seats, while Elara is also available in O-Shape.

•       Product information: Check each product page for the sizing chart, installation kit and user manual.

Non-Electric Bidet or Portable Bidet?

A portable bidet is different from a non-electric bidet. A portable bidet holds its own water and requires no permanent plumbing connection or installation. The Conor portable bidets use a rechargeable battery or batteries for the spray, so they are not non-electric in the same way as a bidet seat that runs on household water pressure. Empty the reservoir before travel and check your airline and airport requirements for rechargeable devices and liquids.

If you want a water wash fitted to your toilet at home, compare a non-electric bidet seat. If you want a bidet you can carry with you, compare the Conor portable bidet collection.

Planning a Non-Electric Bidet in a Renovation

If you are renovating, a few points can be planned early:

•       Choose the toilet with the bidet seat in mind: Check the toilet shape, mounting points and water inlet position against the non-electric bidet seat’s sizing chart.

•       Plan the water connection: Share the product information with your plumber, so the connection suits the model and inlet side.

•       Allow clearance: Leave room around the toilet for the side lever and for the seat and cover to open fully.

•       Think about the future: If you may want an electric bidet seat later, consider whether to add a power point near the toilet during the renovation.

Caring for a Non-Electric Bidet

Looking after a non-electric bidet keeps it working as designed. Follow the care instructions in the user manual for your model. General points to keep in mind:

•       Follow the user manual for cleaning the seat, cover and nozzle.

•       Use the cleaning products and methods the user manual recommends.

•       Turn the side lever fully off after each use.

•       Check the water connection from time to time, and contact a licensed plumber if you notice a leak.

•       Follow the user manual for any steps on turning off the water supply when the bidet is not in use for a long period.

Matching a Non-Electric Bidet to Your Household

Every household uses the bathroom a little differently. Here is how a non-electric bidet can suit different bathrooms:

•       No power point near the toilet: A non-electric bidet needs no electricity.

•       D-Shape or O-Shape toilet: The Elara comes in both shapes, subject to dimensions, mounting points and other fit requirements.

•       Keeping your current seat: The Ember handheld bidet spray sits beside the toilet, so your toilet seat stays as it is.

•       Guest bathrooms and ensuites: A side lever gives a single control for the wash.

•       Holiday homes and second bathrooms: A non-electric bidet adds a water wash where you may not want to add a power point.

Non-Electric Bidet Questions to Ask Before You Order

Before you choose a non-electric bidet, it can help to write down answers to a few questions:

11.  Is my toilet D-Shape or O-Shape, and what are its measurements?

12.  Which side is the water connection on?

13.  Do I want a bidet seat, or would I rather keep my seat and use a bidet spray?

14.  Am I happy with water at the temperature supplied by the household water connection?

15.  Is there a power point near the toilet, and would I rather not add one?

With these answers, you can compare each non-electric bidet product page and decide which option suits your bathroom.

How to Compare Non-Electric Bidet Product Pages

When you open two or more non-electric bidet product pages, work through the same points on each one:

•       Shape: Check whether the model suits a D-Shape or O-Shape toilet.

•       Sizing chart: Compare the sizing chart with your toilet measurements.

•       Water inlet: Check the left or right water inlet version.

•       Wash and controls: Note the wash options and how the side lever works.

•       Seat and cover: Check the seat and cover details, such as soft closing.

•       What is in the box: Check the installation kit and parts listed for the model.

•       User manual: Read the user manual, where available, for operating and care instructions.

Non-Electric Bidet Terms at a Glance

Non-electric bidet product pages use a few terms that are useful to know:

•       Side lever: The control you turn to open the water flow and set the water pressure.

•       Nozzle: The part under the seat that extends and sprays water.

•       Water inlet: The connection point on the bidet seat that joins the water supply.

•       Left or right inlet: The side of the bidet seat where the water connects.

•       Soft-closing seat: A seat and cover that close slowly.

•       Fit guide or sizing chart: The measurements used to check whether a bidet seat suits your toilet.

Non-Electric Bidet Myths and Facts

A few points come up when people compare a non-electric bidet:

•       “A non-electric bidet needs power.” No. A non-electric bidet runs on household water pressure and needs no power point.

•       “A non-electric bidet heats the water.” No. It uses water at the temperature supplied by the household water connection and does not heat it.

•       “Any non-electric bidet seat fits any toilet.” No. Fit depends on the toilet shape, dimensions, mounting points and water inlet position, so check the exact model’s fit guide.

•       “A non-electric bidet needs no installation.” A fitted non-electric bidet connects to the household water supply, so it must be installed by a licensed plumber in accordance with applicable Australian plumbing requirements.

Choosing a Non-Electric Bidet Brand

When comparing bidet brands, consider product compatibility, features, warranty, support and the information provided for each model.

For each non-electric bidet you compare, look for:

•       Product information: Clear details on the wash, controls and seat.

•       Fit information: A sizing chart or fit guide you can check against your toilet.

•       Installation information: Details on the water connection and inlet side.

•       Warranty and support: The warranty terms and how to contact the brand with questions.

Conor is a bidet brand with toilet & bidet seats for Australian homes, including non-electric bidet seats, smart bidet seats, a handheld bidet spray, portable bidets and smart toilets. Browse the full range of toilet & bidet seats.

Non-Electric Bidet: Where to Start

If you are new to the non-electric bidet, start with your toilet rather than the product. Look at the toilet shape, take the measurements, and find the water connection side. Then open the Conor non-electric bidet seat collection and compare the Elara D-Shape and O-Shape sizing charts with your toilet. If you would rather keep your toilet seat, compare the Ember handheld bidet spray. If you are unsure about fit, send the Conor team top and side photos of your toilet together with the relevant measurements before ordering.

Non-Electric Bidet: Summary

A non-electric bidet adds a water wash to your toilet without needing a power point. It runs on household water pressure and does not heat the water. Before you choose a non-electric bidet:

•       Check your toilet shape, size, clearance and water inlet against the exact model’s fit guide.

•       Choose the D-Shape or O-Shape version and the left or right inlet version.

•       Decide between a non-electric bidet seat and a handheld bidet spray.

•       Arrange a licensed plumber for installation.

Compare each model in the Conor non-electric bidet seat collection.

Frequently Asked Questions

What is a non-electric bidet?

A non-electric bidet is a bidet that runs on household water pressure and does not use power. It can be a non-electric bidet seat or a handheld bidet spray.

How does a non-electric bidet work?

A non-electric bidet seat connects to the water supply at the toilet. When you turn the side lever, it opens the water flow to the nozzle and sets the water pressure.

Does a non-electric bidet need power?

No. A non-electric bidet runs on household water pressure, so it needs no power point near the toilet.

Does a non-electric bidet heat the water?

No. A non-electric bidet uses water at the temperature supplied by the household water connection and does not heat it.

What is the difference between a non-electric bidet and an electric bidet?

A non-electric bidet runs on water pressure and does not heat the water. An electric bidet uses power for water heating, seat heating, drying and electronic controls, with features that vary by model.

Is a non-electric bidet seat the same as a non-electric bidet toilet seat?

Yes. Both names describe a bidet seat that replaces your toilet seat and runs on household water pressure.

Will a non-electric bidet seat fit my toilet?

Check the toilet shape, pan length and width, mounting-hole spacing, rear and side clearance, and water inlet position against the exact model’s fit guide. Ask Conor to confirm compatibility if unsure.

What shapes does the Conor non-electric bidet seat come in?

Conor offers D-Shape smart and non-electric seats, while Elara is also available in O-Shape.

Which water inlet side do I need?

Facing the toilet, check whether the water connection is on the left or the right. The Elara comes in left and right water inlet versions.

Who installs a non-electric bidet?

Any fitted bidet seat or handheld bidet spray connected to the household water supply must be installed by a licensed plumber in accordance with applicable Australian plumbing requirements. The plumber must determine and provide the backflow protection required for the installation.

How do I adjust the water pressure on a non-electric bidet seat?

Turn the side lever. The lever opens the water flow to the nozzle and sets the water pressure.

Is a handheld bidet spray a non-electric bidet?

Yes. A handheld bidet spray runs on household water pressure and needs no power. Hold and aim the sprayer, and press the lever to wash.

Can I keep my toilet seat and use a non-electric bidet?

Yes. A handheld bidet spray sits on a holder on the wall beside the toilet, so you keep your current toilet seat.

What should I look for in a non-electric bidet brand?

When comparing bidet brands, consider product compatibility, features, warranty, support and the information provided for each model.

Where can I buy a non-electric bidet in Australia?

You can order a Conor non-electric bidet online from conors.com.au, with details and photos on each product page.