Why Do I Still Have to Wipe After Using a Bidet?

Bidets are becoming increasingly popular in Australia as people become more aware of the hygiene and environmental benefits over toilet paper. But some people find they still reach for paper occasionally even after switching to a handheld bidet spray. Here's why that happens, and how to get closer to a no-wipe routine. Compare our bidet sprays, all WaterMark certified for Australian homes.

Reasons You Might Still Need to Wipe

Technique. Water pressure and nozzle angle both affect how thorough the clean is - a quick adjustment often solves this.

A larger amount of stool. A handheld spray may not clear everything in one pass in this case; wiping first to remove the excess, then using the spray to finish, works well.

Hemorrhoids. These can make thorough cleaning uncomfortable even with a bidet. A gentle pat-dry with a soft cloth afterward, rather than wiping, tends to be more comfortable.

Sensitive skin. Some people find the water itself mildly irritating at higher pressure - lowering the setting usually resolves this.

Getting the Most Out of Your Bidet Spray

• Adjust the pressure until you find a setting that cleans thoroughly without discomfort - there's no single "correct" setting, it varies by person.
• Aim at a downward angle to avoid splashing and direct the stream where it's needed.
• Note on water temperature: standard handheld sprays like the Conor Ember run on your existing cold water supply. If you specifically want a warm-water wash, that's a feature of our electric smart seats rather than the handheld spray - worth knowing which you're actually after.
• Extend the wash slightly if you need a more thorough clean rather than repeating short bursts.

Benefits Worth Remembering

• Improves hygiene - a directed water stream cleans more thoroughly than wiping alone.
• Gentler on the skin than dry paper, which reduces irritation for many people.
• More comfortable for most users once the pressure and angle are dialled in.

Installation in Australia

Every bidet spray connects to your water supply via a T-valve, so Australian plumbing regulations require a licensed plumber to install it — this isn't optional, regardless of how simple the fitting looks. Every Conor spray is WaterMark certified and ships with a full installation kit to keep the job quick for your plumber.

Want to skip drying altogether? A seat with an air-dry function removes this step entirely - browse our range of smart bidet seats.

FAQ

Why do I still have to wipe after using a bidet spray?

Usually technique (pressure or angle), a larger amount of stool, hemorrhoids, or sensitive skin. Most of these are solved by adjusting pressure or pat-drying with a soft cloth instead of wiping.

Does a handheld bidet spray use warm water?

No - standard handheld sprays use your existing cold water supply. Warm water is a feature of electric smart seats, not handheld sprays.

How can I reduce wiping when using a bidet spray?

Adjust pressure to a comfortable level, aim the spray at a downward angle, and extend the wash slightly if needed rather than repeating short bursts.

Are there alternatives to wiping dry after a bidet spray?

Pat-drying with a clean, soft towel works well. If you want to skip drying entirely, a smart bidet seat with an air-dry function removes the step altogether.