What are the dimensions of the Conor FlushGreen Smart Toilet?

The Conor FlushGreen Integrated Smart Toilet measures approximately 720mm long x 370mm wide x 840mm high. The pan height is approximately 485mm from finished floor level to the top of the toilet. These measurements should be checked against the available bathroom space and plumbing layout before installation.

How does the Conor FlushGreen heat its wash water?

The Conor FlushGreen uses an instant electric water-heating system. Water is heated on demand during washing rather than continuously stored in a traditional hot-water tank, providing warm-water washing when required without needing a separate household hot-water connection.

What S-trap rough-in does the Conor FlushGreen support?

The Conor FlushGreen supports S-trap rough-in distances from approximately 70mm to 300mm, allowing it to accommodate different floor-outlet plumbing configurations. A licensed plumber should confirm the actual rough-in measurement before installation.

What P-trap outlet distance does the Conor FlushGreen require?

For a P-trap installation, the Conor FlushGreen has an approximately 180mm wall-outlet distance. The existing waste position should be checked before installation to confirm compatibility.

Is the Conor FlushGreen certified for use in Australia?

Yes. The Conor FlushGreen is WaterMark certified, WELS registered and SAA approved, and incorporates a dual-check-valve backflow prevention system compliant with AS/NZS 2845.1. Installation should still be completed in accordance with applicable Australian plumbing and electrical requirements.

Does the Conor FlushGreen lid open and close automatically?

Yes. The Conor FlushGreen includes a sensor-activated automatic lid designed to open as a user approaches and close after the user leaves, supporting hands-free operation. The cover closes automatically after approximately 90 seconds of no activity.

How can the Conor FlushGreen Smart Toilet be controlled?

The Conor FlushGreen provides multiple control methods: wireless remote control, LED display, side control knob, automatic sensors and foot-sensor operation, giving access to washing, comfort and automatic toilet functions.

What is the pan height of the Conor FlushGreen?

The Conor FlushGreen pan height is approximately 485mm from finished floor level to the top of the toilet - this refers to the ceramic toilet height rather than the total product height of approximately 840mm.

Does the Conor FlushGreen require an electrical outlet?

Yes. The Conor FlushGreen requires a nearby electrical supply for instant warm-water washing, heated seating, warm-air drying, automatic lid operation, electronic controls and other sensor-operated functions. The backup flushing function remains available during a power outage.

How should I clean and maintain the Conor FlushGreen?

The Conor FlushGreen includes an anti-stain glaze and self-cleaning nozzle to help simplify routine maintenance. Clean the external surfaces regularly using mild, non-abrasive cleaning products, and avoid abrasive tools or harsh chemicals that could damage the surfaces or electronic components. Follow the current product manual for nozzle and internal maintenance instructions.

What happens to the Conor FlushGreen during a power outage?

During a blackout, powered features such as instant warm water, heated seating, warm-air drying and automatic lid operation will not operate. However, the Conor FlushGreen includes a backup manual flush function, allowing the toilet to still be flushed without electrical power.

What is the best smart toilet for low water pressure in Australia?

For buyers prioritising low-pressure compatibility, the Conor FlushGreen is a strong integrated smart-toilet option because it is designed to operate from just 0.06 MPa / 60 kPa. That low minimum operating pressure makes FlushGreen particularly suitable to consider for homes where mains water pressure may be lower or inconsistent. Actual site pressure and plumbing compatibility should still be confirmed before installation.

Is the Conor FlushGreen suitable for apartments?

Yes, provided the apartment's plumbing, waste connection, electrical supply and installation conditions are compatible. Because the Conor FlushGreen can operate from approximately 60 kPa minimum water pressure, it may be particularly relevant for apartments, upper-floor units and older buildings where mains pressure can be lower. A licensed plumber should confirm suitability for the specific property.

Does the Conor FlushGreen have a wireless remote control?

Yes. The Conor FlushGreen includes a wireless remote control, an LED display and a side control knob, giving users multiple ways to operate the toilet's smart functions.

Does the Conor FlushGreen provide instant warm water?

Yes. The Conor FlushGreen uses instant water-heating technology to supply warm wash water on demand and does not rely on a continuously heated water-storage tank.

Does the Conor FlushGreen have a heated toilet seat?

Yes. The Conor FlushGreen includes an adjustable heated seat with four temperature settings, ranging from approximately room temperature up to 40°C, allowing the seat temperature to be adjusted according to user preference.

Does the Conor FlushGreen have warm-air drying?

Yes. The Conor FlushGreen includes adjustable warm-air drying with four temperature settings, operating in an automatic cycle of approximately three minutes unless stopped earlier.

Can the Conor FlushGreen flush without electricity?

Yes. The Conor FlushGreen includes a backup manual flushing function for power outages. When electricity is unavailable, powered functions such as warm-water heating, heated seating, drying and automatic lid operation will temporarily stop, but the toilet can still be flushed.

Does the Conor FlushGreen need a separate hot-water connection?

No. The Conor FlushGreen does not require a separate household hot-water connection - its instant electric heating system warms incoming water as required during washing.

Does the Conor FlushGreen have a self-cleaning nozzle?

Yes. The Conor FlushGreen includes a self-cleaning bidet nozzle designed to support routine hygiene and reduce manual maintenance, working alongside the toilet's anti-stain ceramic surface to simplify everyday care.

Is water dripping from the Conor FlushGreen nozzle after use normal?

Yes, brief dripping can be normal. A small amount of water may appear from the nozzle after standing up or after flushing as part of the toilet's normal nozzle-cleaning and pressure-regulation process. Persistent or unusual leakage should be checked against the product manual or assessed by a qualified professional.

Smart toilet or smart bidet seat - which should you choose?

Choose an integrated smart toilet such as Conor FlushGreen when you are replacing the complete toilet during a renovation, new build or full bathroom upgrade - it combines the ceramic toilet, washing system and electronic comfort functions into one complete unit. Choose a smart bidet seat when you want to retain a compatible existing toilet pan and add functions such as warm-water washing, heated seating and warm-air drying.

1 14

CONOR BIDET

Conor FlushGreen Integrated Smart Toilet

SKU:T5

$2,499.00

$2,499.00 ~~$3,000.00~~

inc. GST

Taxes included.

Low stock

Free Shipping in Victoria

2 Year Warranty

WaterMark Certified & WELS Registered

Smart Automatic Lid

Instantaneous Heating System

Quantity

Buy now, pay later

Description

The toilet of the future is here, and it's smarter than you, but no worries, it won't judge your dietary choices!

The Conor FlushGreen Integrated Smart Toilet combines personalized hygiene with intelligent automation.

Featuring Gentle Feminine Wash, Pulsating Massage, and Oscillating Cleaning, it ensures thorough, skin-friendly cleansing for every user.

A self-cleaning stainless-steel nozzle and dual filtration system deliver ultra-pure water with every rinse.

Enjoy continuous warm water, a heated seat, and customizable air drying—all controlled via remote, LED panel, or side knob.

Safety meets innovation with smart seat sensors, an instant stop function, backup flush, and a flame-resistant, easy-clean design.

Features

Certifications & Compliance

WaterMark™ Certified (Australian Plumbing Approval)

WELS Registered (Water Efficiency Labelling & Standards Scheme)

SAA Approved (Electrical Safety Certified)

Hygiene & Cleaning

Gentle Feminine Wash

Thorough Hip Cleaning

Pulsating Massage Wash

Oscillating Cleaning Mode

Hygienic Self-Cleaning Nozzle

Advanced Dual Filtration System

Control & Customization

Wireless Remote Control

LED Digital Display Panel

Convenient One-Touch Side Knob

Instant Stop Function

Adjustable Nozzle Positioning

Variable Water Pressure Control

Customizable Water Temperature

Adjustable Air Drying Temperature

Personalized Seat Heating Levels

Comfort & Warmth

Instant Warm Water Supply

Warm Air Dryer for Comfort

Ergonomic Heated Seat

Soft-Close Lid for Silent Operation

Antibacterial Seat Material

Anti-Stain & Easy-Clean Glaze

Smart Features

Automatic Flushing System

Smart Seat Sensor Activation

Backup Flush Function During Power Outage

Eco-Friendly Energy-Saving Mode

Integrated Night Light for Visibility

Safety & Durability

High-Hazard Backflow Protection complying with AS 2845.2

Flame-Resistant Construction

Built-In Leakage Protection System

Low-Voltage 12V Safety Design

Installation Kit Inclusions

Bidet Toilet Seat
Remote Control
Aviation Plug
Decorative Leather Stopper
Dual Check Valve
Screw
Water Pipe Sealing Ring
Screw Cap
Instructions Manual

View full details

WaterMark™ certified

100% Australian Owned.

Inbuild Backflow Prevention Device

Auto Open/Close

Conor FlushGreen

About the Conor FlushGreen heated toilet

The Conor FlushGreen is an integrated smart toilet designed to work from water pressure as low as 60 kPa.

The FlushGreen combines the bowl, bidet and seat in one unit. The lid opens automatically, the toilet flushes automatically, and a foot sensor can open the lid and flush. You can also use the wireless remote, LED display or side knob. Wash options include front, rear, oscillating and massage, with adjustable water temperature, a heated seat and a warm air dryer.

Conor FlushGreen Technical Specifications

Specification	Detail
Dimensions	720 × 370 × 840 mm
Pan height	485 mm
Rated voltage	AC 220–240V, 50/60Hz
Rated power	1300W
Water inlet pressure	0.06–0.6 MPa / 60–600 kPa
Water inlet temperature	5–40°C
Wash-water discharge	Approx. 700–750 ml/min
Heated-seat power	40W
Deodoriser	Activated-carbon high-efficiency filter
S-trap compatibility	70–300 mm rough-in
P-trap compatibility	180 mm wall outlet
Warranty	2 years

S-Trap and P-Trap Compatibility

What S-Trap Rough-In Does FlushGreen Support?

FlushGreen supports an S-trap rough-in from 70 mm to 300 mm.

What Is the P-Trap Measurement?

The P-trap wall-outlet distance is 180 mm.

Bathroom plumbing measurements should be checked before ordering.

What's Included with the Conor FlushGreen?

The Conor FlushGreen includes:

Conor FlushGreen integrated smart toilet
Wireless remote control
Aviation plug
Dual check valve
Water-pipe sealing ring
Screw set
Decorative leather stopper
Instruction manual

Power and Water Requirements

Before installation

Before ordering, check that:

Water pressure is between 60 and 600 kPa
A suitable grounded electrical supply is available
The power outlet meets the specified electrical requirements
Water supply connections use compliant components

Australian customers researching installation requirements can also review Conor's bidet installation guide for background on licensed plumbing connections.

Cleaning and Maintenance

How Do I Clean the FlushGreen?

Wipe the exterior regularly using a warm, damp cloth and avoid abrasive cleaning products.

The anti-stain glaze and self-cleaning nozzle are designed to simplify everyday maintenance.

How Often Should the Water Filter Be Replaced?

Every 3–6 months under normal conditions
Every 6–12 months where water quality is good

Who Is the Conor FlushGreen Best For?

A Smart Toilet for Low Water Pressure

Its 60 kPa minimum operating pressure makes it especially relevant for apartments, older homes and properties where mains pressure is weaker.

A Hands-Free Smart Toilet

Automatic lid operation, foot-sensor control and automatic flushing reduce the need to touch the toilet during normal use.

A Smart Toilet That Still Flushes During a Blackout

The backup flush provides normal toilet functionality even when powered smart functions are unavailable.

A Smart Toilet with Remote Control

The wireless remote provides direct adjustment of wash, temperature, pressure, nozzle, drying, flushing and seat functions.

A Fully Integrated Smart Toilet

Unlike a retrofit bidet seat, FlushGreen combines the toilet, bidet wash, heating, drying and smart-control system in one fixture.

If you're unsure which format is right for your bathroom, read Conor's Japanese Smart Toilet Seats vs Integrated Smart Toilets guide.

Guides & Documents

Instruction Manual
View Instruction

View Document (2.39MB)
Specification

View Document

Free Shipping

Automatic Flushing System

2-Year Warranty

Proudly Australian-Owned

Dispatch from Melbourne

Meet the Future of Smart Toilets

High Top

Conor Viora

Advanced smart toilet with voice control and enhanced hygiene features.

Low Pressure Ready

Conor FlushGreen

Integrated smart toilet designed to operate from low water pressure.

✓

Both include

Automatic Lid Automatic Flush Foot Sensor Heated Seat WaterMark™ Certified Backflow Prevention

Viora highlights

Voice Control UV / Infrared Sterilisation Automatic Foam Shield

FlushGreen highlight

60 kPa Minimum Pressure

FEATURE-BY-FEATURE

See exactly how they differ

Voice Control

✓ Full Voice Control

× No

Minimum Water Pressure

• 150 kPa

• 60 kPa

UV / Infrared Sterilisation

✓ Yes

× No

Automatic Foam Shield

✓ Yes

× No

Automatic Lid

✓ Yes

Foot Sensor

✓ Hands-Free Operation

Automatic Flush

✓ Yes

Controls

• Voice + Remote + LED Display + Side Knob + Foot Sensor

• Remote + LED Display + Side Knob + Foot Sensor

Wash Functions

• Front, Rear, Oscillating & Massage

Water Temperature

• 4 Levels

Heated Seat

• 4 Levels

Warm-Air Dryer

• 4 Levels, Approx. 2-Min Cycle

• 3 Levels, Approx. 3-Min Cycle

WaterMark™ Certified

✓ Yes

Backflow Prevention

✓ Yes

Dimensions

• 700 × 400 × 490 mm

• 720 × 370 × 840 mm

Frequently Asked Questions

Conor FlushGreen Smart Toilet with Auto Flush FAQs

18 articles in this collection

View All

Conor FlushGreen Smart Toilet with Auto Flush FAQs

Back

Updated on September 15, 2026

What colour options are available for the Conor FlushGreen?

The Conor FlushGreen is available in a classic white finish. It is currently the only white model in Conor's integrated smart toilet range, while the Conor Viora is available in Khaki and Grey.

Updated on September 15, 2026

What are the dimensions of the Conor FlushGreen?

The FlushGreen measures 720 × 370 × 840 mm (L × W × H), with a pan height of 485 mm from the finished floor.

Before purchasing, check the available bathroom space and waste-outlet position with your plumber to confirm installation compatibility.

Updated on September 15, 2026

Does the Conor FlushGreen work with low water pressure?

Yes. The FlushGreen is designed to operate from a minimum incoming water pressure of just 0.06 MPa / 60 kPa.

The current product specifications list an operating range of 60–600 kPa, making it suitable for many apartments, older buildings and properties where mains water pressure may be lower.

Updated on September 15, 2026

Does the Conor FlushGreen have a foot sensor?

Yes. The FlushGreen includes a dedicated foot sensor for hands-free operation.

It can be used to open the seat and activate flushing without touching the toilet, while the automatic sensing system manages lid and seat closing functions.

Updated on September 15, 2026

What type of heating system does the FlushGreen use?

The FlushGreen uses an instant water-heating system, providing warm wash water on demand rather than maintaining a conventional tank of pre-heated hot water.

Water temperature can be adjusted between room temperature, 34°C, 37°C and 40°C.

Updated on September 15, 2026

What are the S-trap and P-trap dimensions for the FlushGreen?

The FlushGreen supports an S-trap rough-in from 70 mm to 300 mm and a P-trap wall outlet of 180 mm.

Have your plumber confirm the existing waste configuration and measurements before installation.

Updated on September 15, 2026

Does the FlushGreen lid open and close automatically?

Yes. The FlushGreen has a sensor-activated automatic lid that can open as the user approaches and close automatically after use.

Foot-sensor control provides an additional hands-free way to operate the seat and flushing functions.

Updated on September 15, 2026

Can the Conor FlushGreen be controlled remotely?

Yes. The FlushGreen includes a wireless remote control for wash functions, water pressure and temperature, nozzle position, drying, seat temperature, flushing and lid/seat functions.

It also includes an LED digital display and a side control knob for convenient operation at the toilet.

Updated on September 15, 2026

Does the Conor FlushGreen flush automatically?

Yes. The Conor FlushGreen includes an automatic flushing system that activates after use when the user leaves the toilet, providing a convenient hands-free flush without needing to operate the flush manually.

Updated on September 15, 2026

Does the FlushGreen have a heated seat and warm-air dryer?

Yes. The FlushGreen includes a heated seat with four settings — room temperature, 34°C, 37°C and 40°C — plus adjustable warm-air drying at room temperature, 35°C, 45°C or 55°C.

Updated on September 15, 2026

Is the Conor FlushGreen self-cleaning?

The FlushGreen includes a self-cleaning nozzle that automatically cleans itself as part of normal operation and can also be cleaned using the remote-control function.

Additional hygiene features include dual water filtration, antibacterial seat material and an anti-stain, easy-clean glaze.

Updated on November 2, 2026

Is the Conor FlushGreen WaterMark and WELS certified?

Yes. The Conor FlushGreen is listed as WaterMark certified, WELS registered and SAA approved for Australian plumbing, water-efficiency and electrical requirements.

WaterMark Certificate: View Official WaterMark Certification

It also includes integrated high-hazard air-gap backflow protection that complies with AS/NZS 2845.2:2025.

Updated on September 15, 2026

What happens if there is a power failure?

During a power outage, powered smart functions such as the heated seat, warm-water washing and automatic lid will not operate.

However, the FlushGreen includes a backup manual flush function, allowing the toilet to continue flushing without mains electricity.

Updated on September 15, 2026

What's included with the Conor FlushGreen?

The FlushGreen package includes the integrated smart toilet, wireless remote control, aviation plug, dual check valve, water-pipe sealing ring, screw set, decorative leather stopper and instruction manual.

Updated on September 15, 2026

Does the Conor FlushGreen require a power outlet?

Yes. The FlushGreen requires a suitable nearby electrical supply to operate functions such as warm-water washing, seat heating, drying, automatic flushing and lid operation.

The installation area should have an appropriate grounded electrical supply that meets the specified electrical-safety requirements.

Updated on September 15, 2026

Can I install the Conor FlushGreen myself?

No. The Conor FlushGreen should be installed by a licensed plumber in accordance with applicable Australian plumbing requirements.

Any required electrical work should be completed by a licensed electrician.

Updated on September 15, 2026

How do I clean and maintain the FlushGreen?

The FlushGreen's self-cleaning nozzle, antibacterial materials and anti-stain glaze help reduce routine maintenance.

Clean the exterior regularly using a soft damp cloth and mild, non-abrasive cleaner, and follow the supplied instruction manual for nozzle, filter and internal maintenance.

Updated on September 15, 2026

Does the Conor FlushGreen Integrated Smart Toilet have integrated high-hazard backflow protection?

Yes. The Conor FlushGreen Integrated Smart Toilet features integrated high-hazard air-gap backflow protection that complies with AS/NZS 2845.2:2025.

Certification Reference: Backflow Protection – WaterMark Certificate

Conor FlushGreen Smart Toilet with Auto Flush FAQs

Back

Updated on September 15, 2026

What colour options are available for the Conor FlushGreen?

The Conor FlushGreen is available in a classic white finish. It is currently the only white model in Conor's integrated smart toilet range, while the Conor Viora is available in Khaki and Grey.

Conor FlushGreen Smart Toilet with Auto Flush FAQs

Back

Updated on September 15, 2026

What are the dimensions of the Conor FlushGreen?

The FlushGreen measures 720 × 370 × 840 mm (L × W × H), with a pan height of 485 mm from the finished floor.

Before purchasing, check the available bathroom space and waste-outlet position with your plumber to confirm installation compatibility.

Conor FlushGreen Smart Toilet with Auto Flush FAQs

Back

Updated on September 15, 2026

Does the Conor FlushGreen work with low water pressure?

Yes. The FlushGreen is designed to operate from a minimum incoming water pressure of just 0.06 MPa / 60 kPa.

The current product specifications list an operating range of 60–600 kPa, making it suitable for many apartments, older buildings and properties where mains water pressure may be lower.

Conor FlushGreen Smart Toilet with Auto Flush FAQs

Back

Updated on September 15, 2026

Does the Conor FlushGreen have a foot sensor?

Yes. The FlushGreen includes a dedicated foot sensor for hands-free operation.

It can be used to open the seat and activate flushing without touching the toilet, while the automatic sensing system manages lid and seat closing functions.

Conor FlushGreen Smart Toilet with Auto Flush FAQs

Back

Updated on September 15, 2026

What type of heating system does the FlushGreen use?

The FlushGreen uses an instant water-heating system, providing warm wash water on demand rather than maintaining a conventional tank of pre-heated hot water.

Water temperature can be adjusted between room temperature, 34°C, 37°C and 40°C.

Conor FlushGreen Smart Toilet with Auto Flush FAQs

Back

Updated on September 15, 2026

What are the S-trap and P-trap dimensions for the FlushGreen?

The FlushGreen supports an S-trap rough-in from 70 mm to 300 mm and a P-trap wall outlet of 180 mm.

Have your plumber confirm the existing waste configuration and measurements before installation.

Conor FlushGreen Smart Toilet with Auto Flush FAQs

Back

Updated on September 15, 2026

Does the FlushGreen lid open and close automatically?

Yes. The FlushGreen has a sensor-activated automatic lid that can open as the user approaches and close automatically after use.

Foot-sensor control provides an additional hands-free way to operate the seat and flushing functions.

Conor FlushGreen Smart Toilet with Auto Flush FAQs

Back

Updated on September 15, 2026

Can the Conor FlushGreen be controlled remotely?

Yes. The FlushGreen includes a wireless remote control for wash functions, water pressure and temperature, nozzle position, drying, seat temperature, flushing and lid/seat functions.

It also includes an LED digital display and a side control knob for convenient operation at the toilet.

Conor FlushGreen Smart Toilet with Auto Flush FAQs

Back

Updated on September 15, 2026

Does the Conor FlushGreen flush automatically?

Conor FlushGreen Smart Toilet with Auto Flush FAQs

Back

Updated on September 15, 2026

Does the FlushGreen have a heated seat and warm-air dryer?

Yes. The FlushGreen includes a heated seat with four settings — room temperature, 34°C, 37°C and 40°C — plus adjustable warm-air drying at room temperature, 35°C, 45°C or 55°C.

Conor FlushGreen Smart Toilet with Auto Flush FAQs

Back

Updated on September 15, 2026

Is the Conor FlushGreen self-cleaning?

The FlushGreen includes a self-cleaning nozzle that automatically cleans itself as part of normal operation and can also be cleaned using the remote-control function.

Additional hygiene features include dual water filtration, antibacterial seat material and an anti-stain, easy-clean glaze.

Conor FlushGreen Smart Toilet with Auto Flush FAQs

Back

Updated on November 2, 2026

Is the Conor FlushGreen WaterMark and WELS certified?

Yes. The Conor FlushGreen is listed as WaterMark certified, WELS registered and SAA approved for Australian plumbing, water-efficiency and electrical requirements.

WaterMark Certificate: View Official WaterMark Certification

It also includes integrated high-hazard air-gap backflow protection that complies with AS/NZS 2845.2:2025.

Conor FlushGreen Smart Toilet with Auto Flush FAQs

Back

Updated on September 15, 2026

What happens if there is a power failure?

During a power outage, powered smart functions such as the heated seat, warm-water washing and automatic lid will not operate.

However, the FlushGreen includes a backup manual flush function, allowing the toilet to continue flushing without mains electricity.

Conor FlushGreen Smart Toilet with Auto Flush FAQs

Back

Updated on September 15, 2026

What's included with the Conor FlushGreen?

Conor FlushGreen Smart Toilet with Auto Flush FAQs

Back

Updated on September 15, 2026

Does the Conor FlushGreen require a power outlet?

Yes. The FlushGreen requires a suitable nearby electrical supply to operate functions such as warm-water washing, seat heating, drying, automatic flushing and lid operation.

The installation area should have an appropriate grounded electrical supply that meets the specified electrical-safety requirements.

Conor FlushGreen Smart Toilet with Auto Flush FAQs

Back

Updated on September 15, 2026

Can I install the Conor FlushGreen myself?

No. The Conor FlushGreen should be installed by a licensed plumber in accordance with applicable Australian plumbing requirements.

Any required electrical work should be completed by a licensed electrician.

Conor FlushGreen Smart Toilet with Auto Flush FAQs

Back

Updated on September 15, 2026

How do I clean and maintain the FlushGreen?

The FlushGreen's self-cleaning nozzle, antibacterial materials and anti-stain glaze help reduce routine maintenance.

Clean the exterior regularly using a soft damp cloth and mild, non-abrasive cleaner, and follow the supplied instruction manual for nozzle, filter and internal maintenance.

Conor FlushGreen Smart Toilet with Auto Flush FAQs

Back

Updated on September 15, 2026

Does the Conor FlushGreen Integrated Smart Toilet have integrated high-hazard backflow protection?

Yes. The Conor FlushGreen Integrated Smart Toilet features integrated high-hazard air-gap backflow protection that complies with AS/NZS 2845.2:2025.

Certification Reference: Backflow Protection – WaterMark Certificate

We Came. We Sat. We Sprayed. Unfiltered reactions to the Conor experience

We Plant Trees, You Get a Clean Bum!

At Conor's, we're not just about cleaning your bum; we're saving our Mother Earth, one tree at a time! Buy a bidet, and we will plant a tree for you. Think of it as giving Nature a little 'thank you' for, you know, providing the leaves we used to use before the bidets. Plus, trees are great for those tiny, adorable squirrels.

Conor FlushGreen Integrated Smart Toilet

Conor FlushGreen Integrated Smart Toilet

About the Conor FlushGreen heated toilet

Conor FlushGreen at a Glance

Minimum water pressure

Maximum water pressure

Automatic flushing

Foot sensor

Automatic lid

Backup flush during power outage

Heated seat

Instant warm-water wash

Adjustable water temperature

Adjustable water pressure

Warm-air dryer

Wireless remote control

LED display

Side control knob

Self-cleaning nozzle

Dual filtration

WaterMark™ certified

WELS registered

SAA approved

Warranty

Why the Conor FlushGreen Is Different

Works from Just 60 kPa Water Pressure

Hands-Free Smart Toilet Operation

Backup Flush During Power Outages

Automatic Lid and Auto Flush

Does the FlushGreen Lid Open Automatically?

Does the FlushGreen Flush Automatically?

Warm-Water Bidet Wash Functions

Adjustable Water Temperature

Adjustable Water Pressure

Adjustable Nozzle Position

Heated Smart Toilet Seat

Adjustable Warm-Air Dryer

Self-Cleaning Nozzle and Hygiene System

How Does the FlushGreen Nozzle Stay Clean?

Wireless Remote Control, LED Display and Side Knob

Can the FlushGreen Be Controlled Remotely?

Energy-Saving Mode

Australian Compliance

Built-In Backflow Prevention

Conor FlushGreen Technical Specifications

S-Trap and P-Trap Compatibility

What S-Trap Rough-In Does FlushGreen Support?

What Is the P-Trap Measurement?

What's Included with the Conor FlushGreen?

Power and Water Requirements

Before installation

Cleaning and Maintenance

How Do I Clean the FlushGreen?

How Often Should the Water Filter Be Replaced?

Who Is the Conor FlushGreen Best For?

A Smart Toilet for Low Water Pressure

A Hands-Free Smart Toilet

A Smart Toilet That Still Flushes During a Blackout

A Smart Toilet with Remote Control

A Fully Integrated Smart Toilet

Guides & Documents

Instruction Manual

Specification

Meet the Future of Smart Toilets

Image slide

Viora vs FlushGreen

Conor Viora

Conor FlushGreen

Both include

Viora highlights

FlushGreen highlight

See exactly how they differ

Frequently Asked Questions

Conor FlushGreen Smart Toilet with Auto Flush FAQs

Conor FlushGreen Smart Toilet with Auto Flush FAQs

Conor FlushGreen Smart Toilet with Auto Flush FAQs

Conor FlushGreen Smart Toilet with Auto Flush FAQs

Conor FlushGreen Smart Toilet with Auto Flush FAQs

Conor FlushGreen Smart Toilet with Auto Flush FAQs

Conor FlushGreen Smart Toilet with Auto Flush FAQs