Conor Lyra Smart Bidet Seat - Best Value

Yes. The Conor Lyra simply requires access to a nearby 220–240 V electrical supply to power its instant warm-water system, heated seat, warm-air dryer, automatic deodorising system, night light and side-panel controls. The supplied power cord is approximately 1.5 metres long and exits from the right-hand side when facing the toilet.

The Conor Lyra measures approximately 515 mm long × 380 mm wide × 113 mm high, with an inner seat opening of approximately 305 mm × 195 mm. For the best fit, we recommend comparing these measurements with your ceramic toilet pan before ordering.

Yes. The Conor Lyra is WaterMark certified and approved for installation in Australia. WaterMark Model ID: CR-LSB

Yes. The Conor Lyra includes a built-in high-hazard backflow prevention device designed to comply with AS/NZS 2845.1 Australian standards. Installation should still be completed in accordance with applicable Australian plumbing requirements.

The Conor Lyra is designed to operate with water pressure between approximately 0.06 MPa and 0.75 MPa, making it suitable for a wide range of household water supplies.

The Conor Lyra is designed for compatible D-shape toilet pans. As toilet dimensions and fixing positions can vary, we recommend checking the ceramic pan dimensions, mounting area, water connection and nearby power access before ordering to help ensure the best fit.

The Conor Lyra is designed for a simple and straightforward setup. As the bidet connects to the household water supply, Australian plumbing requirements state that it must be installed by a licensed plumber.

Yes. The Conor Lyra uses instant electric water heating, so warm wash water is heated only when required. A separate household hot-water connection is not needed.

Yes. The Conor Lyra provides adjustable water temperature, water pressure and heated-seat temperature settings. Water temperature has four settings:

• Ambient / room temperature
• Approximately 33°C
• Approximately 36°C
• Approximately 39°C

Rear and front washing provide four water-pressure levels, while the heated seat also offers ambient/off, 33°C, 36°C and 39°C settings.

Before cleaning the Conor Lyra, disconnect the electrical power and use a soft damp cloth to clean the seat and exterior surfaces. The Lyra includes a 316 stainless-steel self-cleaning nozzle and a dedicated nozzle-cleaning function. If additional cleaning is required, gently clean the nozzle with a soft brush. Do not use abrasive brushes, harsh chemicals or aggressive cleaning products.

The Conor Lyra includes a 2-year warranty. Refer to Conor's current warranty terms for complete information about coverage, conditions and exclusions.

When facing the toilet, the Conor Lyra water inlet is located on the left-hand side. The supplied water inlet hose is approximately 1 metre long, allowing convenient connection to the water supply.

When facing the toilet, the power cord exits from the right-hand side. The supplied cable is approximately 1.5 metres long, so we recommend having a nearby electrical outlet within reach.

No. The Conor Lyra does not use a separate wireless remote control. Its wash, temperature, drying and other electronic functions are operated using the integrated side control panel attached directly to the seat. If wireless remote operation is preferred, compare Conor Nova Remote.

The Conor Lyra power cord is approximately 1.5 metres long. The cable exits from the right-hand side when facing the installed toilet.

The supplied Conor Lyra water inlet hose is approximately 1 metre / 1,000 mm long. The water inlet connection is located on the left-hand side when facing the toilet.

Yes. The Conor Lyra includes a reusable built-in metal water filter, so routine replacement is generally not required. Depending on local water quality and usage, it can simply be inspected and gently cleaned approximately every 3–12 months.

Yes. The Conor Lyra includes a power-saving mode designed to reduce unnecessary energy consumption when the bidet seat is not being used. The power-saving function can be enabled or disabled using the seat controls.

Yes. The Conor Lyra power-saving mode can remain enabled during normal everyday use. When the seat is unoccupied, the system can automatically reduce unnecessary heating while keeping the bidet available for use.

The Conor Lyra heated-seat indicator colours correspond to approximate temperature settings:

• Blue: approximately 33°C
• Green: approximately 36°C
• Red: approximately 39°C

Seat heating can also be switched off for ambient-temperature seating.

Yes. The Conor Lyra can retain the previously selected wash-position setting. Once a preferred nozzle position is selected, the seat can retain that setting, reducing the need to readjust the wash position for every use.

Yes. The Conor Lyra warm-air dryer provides four approximate temperature settings:

• 35°C
• 42°C
• 48°C
• 54°C

The Lyra can also retain the previously selected dryer-temperature setting for future use.

The inner seat opening of the Conor Lyra measures approximately 305 mm long × 195 mm wide. These are the internal seat-opening dimensions rather than the overall dimensions of the bidet seat.

No. The Conor Lyra uses instant water-heating technology rather than continuously heating and storing a tank of hot water. Wash water is heated as required during use.

No. The Conor Lyra has a built-in catalytic deodorising system that does not require routinely purchased or monthly replacement deodorising cartridges during normal use. The deodorising system is integrated into the bidet seat and designed for long-term operation.

The Conor Lyra is a D-shape electric smart bidet seat with an integrated side control panel. It provides instant warm-water washing, adjustable water pressure and nozzle position, heated seating, warm-air drying, automatic deodorising and a 316 stainless-steel self-cleaning nozzle. Unlike remote-controlled bidet seats, Lyra's controls are permanently attached to the side of the seat.

Yes. The Conor Lyra uses an integrated side control panel attached directly to the bidet seat. The panel provides access to the seat's washing, temperature, drying and other electronic functions without requiring a separate handheld remote.

The Conor Lyra provides four wash-water temperature settings:

• Ambient / room temperature
• Approximately 33°C
• Approximately 36°C
• Approximately 39°C

This allows the wash temperature to be adjusted according to personal preference.

Yes. The Conor Lyra provides four water-pressure levels for rear and front/feminine washing. Users can increase or decrease the wash pressure using the integrated side control panel.

Yes. The Conor Lyra provides four nozzle-position adjustment steps during normal rear and front washing. The adjustable nozzle position helps users direct the wash to a preferred cleansing area.

Yes. The Conor Lyra supports oscillating rear and front washing. When oscillation is activated, the nozzle moves forward and backward to cover a broader cleansing area.

Yes. The Conor Lyra includes an adjustable heated toilet seat with four settings:

• Ambient / heating off
• Approximately 33°C
• Approximately 36°C
• Approximately 39°C

Yes. The Conor Lyra includes an adjustable warm-air dryer with four approximate temperature settings:

• 35°C
• 42°C
• 48°C
• 54°C

Yes. The Conor Lyra retains the previously selected dryer-temperature setting. This reduces the need to select the same drying temperature each time the bidet seat is used.

Yes. The Conor Lyra includes a built-in catalytic automatic deodorising system. When the function is enabled and the seat detects a user, the deodorising system operates automatically to help reduce bathroom odours.

Yes. The Conor Lyra uses a 316 stainless-steel self-cleaning bidet nozzle. It also includes a dedicated nozzle-cleaning function to support routine hygiene and maintenance.

Yes. The Conor Lyra includes a built-in night light. The night light can be switched on or off using the integrated side control panel.

Yes. The Conor Lyra is identified as RCM compliant for applicable Australian electrical requirements. This is separate from its WaterMark certification for plumbing applications.

• The Conor Lyra is designed for compatible D-shape toilet pans.
• For the best fit, we recommend checking your toilet shape, ceramic-pan dimensions, mounting-hole position, available mounting area, water connection and access to a nearby electrical outlet before ordering.

For more guidance, see How to Choose a Bidet Seat for Australian Toilets: Plumbing Compatibility Guide.

No. A separate household hot-water connection is not required. The Lyra connects to the cold-water supply and uses its built-in instant heating system to warm the wash water whenever required.

No. The Conor Lyra does not include UV sterilisation. For a Conor smart bidet seat with UV sterilisation, compare the Conor Arista Auto Smart Bidet Seat, which also includes sensor-activated automatic lid operation.

No. The Conor Lyra uses a manually operated soft-close seat and lid and does not include sensor-activated automatic lid opening. If automatic lid opening and closing is important, compare Conor Ayora or Conor Arista Auto.

Both Conor Lyra and Conor Nova Side Panel use integrated side controls rather than a separate wireless remote. The key physical difference in the supplied comparison data is width:

• Conor Lyra: approximately 380 mm wide
• Conor Nova Side Panel: approximately 455 mm wide

Choose Lyra if a slimmer integrated side-control design is the priority. Choose the Conor Nova Side Panel Smart Bidet Seat if you prefer the Nova seat design and control layout.

The main difference between Conor Lyra and Conor Nova Remote is the control method. Conor Lyra uses an integrated side control panel permanently attached to the seat. Conor Nova Remote uses a separate wireless handheld remote. Both models provide instant warm-water washing, heated seating, warm-air drying and automatic deodorising. Choose Lyra if built-in side controls are preferred. Choose the Conor Nova Remote Smart Bidet Seat if wireless remote operation is more important.

The Conor Lyra Electric Bidet Seat installation package includes:

• Conor Lyra smart bidet seat
• Fixing bracket
• Mounting bolts
• Rubber sleeves
• Metal gaskets
• Snap connector
• G1/2 T-valve
• Approximately 1,000 mm stainless-steel water inlet hose
• Spanner
• Screwdriver
• User manual